3. Remove the carrying tubes and - if applicable - the bracket.
C
Caution: Make sure the screws holding the bracket are put back on the
appliance.
4. Unscrew the screws of the chain cover and remove the cover.
5. Remove the transport protection by cutting the plastic cable tie on the chain wheel.
6. Make sure the chain is correctly on the chain wheels. If not, lift the contra weight a
little and put the chain on the chain wheel.
7. Make sure the door opens and closes correctly.
8. Attach the chain cover on the appliance and tighten the nuts.
9. Make again sure the door opens and closes correctly.
10. Refer to
5.3.7
for measures to be taken when installed against a flammable rear
and/or side wall.
5.3.2
Horizontally align the appliance
Aligning with adjustable feet
1. Adjust the adjustable feet. Use a 13
mm fork spanner.
2. Make sure that the appliance is
installed horizontally. Use a spirit
level.
Installation
18
Evolux 100-45
Summary of Contents for Evolux 100-45
