background image

B

Bottom view with combustion air inlet box

N

Combustion air inlet

R

Combustion air inlet box

S

Adjustable feet

T

Adjustable height frame (option)

Y

Chain cover

3.2

Appliance options

Option

Description

Combustion air inlet box

The appliance can be installed with a combustion air inlet

box to connect a flexible aluminum pipe for the external

combustion air supply. See note.

Combined convection ventilator /

combustion air inlet box

The appliance can be installed with a combined convection

ventilator / combustion air inlet box to connect a flexible

aluminum pipe for the external combustion air supply and

to connect a flexible aluminum pipe for the supply of con-

vection air. See note

Convection set

The appliance can be installed with a convection set. The

convection set collects the heated convection air from the

appliance and releases this air into the room. A convection

ventilator / combustion air inlet box is needed for the con-

vection system.

Adjustable height frames

The appliance can be installed with 2 adjustable height

frames. With these frames the appliance can be installed

higher from the ground level.

Decorative stone bar

A natural stone bar at the front of the appliance.

Stone bar adapter

Use this to install a stone bar supplied by a third party sup-

plier.

Opti-Air

The appliance can have an electronic combustion control

system, 'Opti-Air'. This system controls the combustion at a

preselected combustion level or to a set room temperature.

Fire screen

The appliance can have a safety screen to prevent acci-

dental touching of the hot glass surface.

Description

Evolux 100-45

11

Summary of Contents for Evolux 100-45

















































Reviews: