Barazza 1PIDZ90, Installation Instructions Manual

Page: 32 / 44

24
■
Do not leave the heating elements on without pots or
with empty pots.
■
When you have finished cooking, switch off the relevant
heating element using the control indicated below.
■
Make sure that no cable of any fixed or moving appliance
comes into contact with the glass of the hob or with the
hot pots.
■
Pots with scratched bottoms or damaged pots (not
enamelled cast iron pots,) may damage the ceramic
glass.
■
Sand or other abrasive materials may damage ceramic
glass.
■
Avoid dropping objects, even little ones, on the ceramic
glass.
■
Do not hit glass edges with pots
■
Do not put or leave empty pots on the ceramic hobs.
■
Never place any hot container over the control panel.
WARNING
If the surface of the hob is cracked, turn off the appliance
and disconnect it from the electrical mains in order to
prevent any possible electric shocks.
WARNING
This appliance is not intended for gas.
ENVIRONMENTAL PROTECTION
Your new appliance is particularly energy-efficient. Here you can find tips on how to save even
more energy when using the appliance.
SAVING ENERGY
■
During cooking, ensure that there is a sufficient supply of air so that the extractor hood can
work efficiently and with a low level of operating noise.
■
Adjust the fan speed to the intensity of the cooking fumes. Only use intensive mode where
this is required. A lower fan speed means that less energy is consumed.
■
If there are intensive cooking fumes, select a higher fan speed in good time. If cooking fumes
have already spread in the kitchen, the extractor hood must be operated for longer.