28
SETTING THE POWER LIMIT BEFORE SWITCHING THE APPLIANCE ON
Changeable Power Menu 7,4kW/2,8kW/3,5kW
■
Setting is possible only during the first two minutes after plug in the appliance.
■
The touch has to be switched off, unlocked and no zone should be selected.
■
Press at the same time the two external cooking zones switches and hold it for 3 seconds
(
E*
and
E**
, see picture).
■
After entering the service menu a beep occurs.
■
Now the power level could be selected with the
[+]
and
[-] keys.
■
The Timer Display show’s the current setting:
«01» 7,4kW
«02» 2,8kW
«03» 3,5kW
■
To save the current setting press once again the two external cooking zones switches at the
same time and hold it for 3 seconds.
■
After successfully saving the setting a beep occurs.
Note: If there is no action for 60 seconds the change will be not accepted.
If you set the power limit to 2,8kW or 3,5kW, you can not turn all the fires on at the same
time.
SWITCHING THE APPLIANCE ON
Press the
On-Off
key to switch the hob on. All the displays relative to the cooking zones switch
on in the «0» standby position.
The control unit remains active for 20 seconds.
If no cooking zone is selected within this time, the appliance switches off automatically.
SWITCHING THE COOKING ZONES ON
To switch on a cooking zone press the corresponding
Zone Selection key
then adjust the heat
setting using the
[+] key
and
[-] Key
within 10 seconds. The heat level of each single cooking
zone can be set in 9 different positions and will be shown in the corresponding cooking zone
display with a number ranging from «1» to «9». Press the
[+] key
to increase the heat level,
press the
[-] key
to decrease it.
POT DETECTION « »
Each induction cooking zone has a pot detection minimum limit, which varies according to the
material of the cookware being used. For this reason, you should choose the cooking zone which
is most suitable for the diameter of the cookware you are going to use.
If the symbol « » appears on the cooking zone display, it means that:
■
The cookware used is not suitable for induction cooking.
■
The cookware diameter is smaller than the one allowed by the hob.
■
No cookware is on the cooking zone.
For more details refer to chapters “Induction” and “Technical specifications”.
RESIDUAL HEAT « »
If the temperature of the cooking zone is still high (over 50°) after it has been switched off, the
relative display will indicate the « » symbol (residual heat). The symbol will only switch off
when the burn risk in no longer present.
Summary of Contents for 1PIDZ90
