29
BRIDGE FUNCTION « »
This function allows you to combine the front cooking zone to the rear cooking zone (a+b/c+d)
to create one large zone where to place the pots. It is particularly suitable when it comes to
cooking with large pans (eg. oven pans). Pay attention in placing the cookware in the correct
position on the cooking zones.
To activate the Bridge function between two adjacent cooking zones press simoultaneously on
both
Zone Selection
keys. The bridge symbol « » will appear on one of the two cooking zone
displays pressed indicating that the function is active.
NOTE: The settings of the bridge zone are only enabled by the cooking zone keys with the heat
setting. To deactivate the function press simoultaneously on both
Zone Selection
keys. The
bridge symbol « » goes off.
POWER BOOST/QUICK HEATING « »
This function further reduces cooking time of a given area taking the temperature to the
maximum power for a 5 minutes interval. At the end of this interval, the cooking zone power
automatically returns to level «9».
The use of this function is indicated for the short time heating of large quantities of liquid (eg.
water for cooking pasta) or dishes.
To activate this fuction, select a cooking zone then press the
[+] key
until the symbol « »
appears on the cooking zone display.
WARMING FUNCTION « »
This function sets the heat temperature of the selected cooking zone at
42°C
to keep food
warm.
Once the cooking zone is started, press the
[+] key
and select value «1» then press the [-] key.
The symbol « » will appear on the cooking zone display, meaning that the warming function is
activated.
TIMER
This function allows you to set the time from «01» (1 minute) to «99» (99 minutes) for the
automatic switch off of a cooking zone.
Select a cooking zone by pressing the corresponding
Zone Selection key
and adjust the heat
level. Press simultaneously the
[+]
and
[-] keys
to activate the Timer display. Set the desired
time within 10 seconds using the
[+]
and
[-] keys
. Wait 10 seconds for the automatic
con
fi
rmation of the settings. The time countdown will be shown on the timer display.
When time elapses the cooking zone will automatically switch off, the display will show a
fl
ashing «00» and an acoustic signal will be heard. Press any key on the control panel to stop the
signals.
To disable the timer of a cooking zone press the corresponding
Zone Selection key
then press
simoultaneously the
[+]
and
[-] keys
to turn on the Timer display. Bring the timer value back to
«00» by using the
[-] key
. Wait 10 seconds for the automatic con
fi
rmation.
EGG TIMER/REMINDER
This function allows you to set an acoustic reminder which stays active after switching the
appliance off.
To enable this function switch on the appliance then press simoultaneously the
[+]
and
[-] keys.
The timer display lights up. Set the time, ranging from «01» (1 minute) to «99» (99 minutes), by
pressing the
[+]
and
[-] keys
. Wait 10 seconds for the automatic con
fi
rmation of the settings.
The time countdown will be shown on the timer display.
When time elapses the display will show a
fl
ashing «00» and an acoustic signal will be heard.
Press any
key
on the control panel to stop the signals.
Summary of Contents for 1PIDZ90
