77
8.2.4 Mast rollers replace
(1) Use the same way as 8.2.3 to disassemble the carriage from the inner mast.
(2) Let the truck parking on the horizontal ground and wedge up the front wheels for
250 to 300mm.
(3) Apply the parking brake and wedge up the rear wheels.
(4) Disassemble the fitted bolts for the lift cylinder and the inner mast. Hang up the
inner mast without loosing the shims for the top of the piston rod carefully.
(5) Disassemble the connecting bolts for the lift cylinder and the bottom of the outer
mast. Disassemble the lift cylinders and the oil pipes between the two cylinders without
loosen the oil pipes
’
joints.
(6) Put down the inner mast. Disassemble the main rollers under the bottom of the
inner mast.
(7) Replace the main rollers
·Disassemble the upper main rollers with a drawing tool, don’t loose the shims.
·Install the new rollers and t
he shims disassembled before.
(8) Hang up the inner mast to let all the rollers go into the mast.
(9) Reassemble the lift cylinder and the carriage.
Fig.8-7 Fig.8-8
Summary of Contents for CPDS15
