4
Notice:
Dismantling and slinging the component shall not be performed without the
approval of our company. Under special circumstances, the appointed sling position
should be used. The balance weight, fork and mast of the truck all have their appointed
hang up position. The above
–
mentioned capacity is only for a reference, which may be
adjusted because of configuration difference or technology optimization.
2.2 Storage of forklift truck
(1)
Lower the mast to the lowest position.
(2) Turn off the key switch, place the levers in the neutral position. Disconnect the
power plug.
(3) Apply the parking brake.
(4) Wedge up the front and rear wheels.
(5) If the truck leaves unused for long time, build the wheels on stilts. Charge the
battery once a month.
2.3 Precautions before operation.
(1) Check all the instruments.
(2) Check the tyre inflation pressure.
(3) Check all the levers and pedals.
(4) Check if the voltage of the battery is in normal limit. Check if the density and level
of the electrolyte is appropriate.
(5) Check for all the terminals and plugs.
(6) Check hydraulic oil, electrolyte and brake fluid for leakage.
(7) Check all connectors and fasteners for looseness.
(8) Check if all the lamps and signals are in normal state.
(9) Release the parking lever.
(10) Make trial of the mast for lifting and lowering, forward and backward tilting, and
the truck for steering and braking.
(11) The contamination level of the hydraulic oil should be lower than grade 12.
2.4 Information of safety operation
(1) The forklift truck belongs to special equipment. Only trained and authorized
operator shall be permitted to operate and service the truck.
Summary of Contents for CPDS15
