WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
Printed in USA
0
1
/1
6
P/N 130426
R
ev.
D
A-GAGE
®
EZ-ARRAY
™
Instruction Manual
Two-piece sensing array with 2 analog and 2 discrete outputs, plus serial output
Features
A cost-effective, two-piece measuring light curtain designed for
•
quick and simple installations with the sophistication to handle
the toughest sensing applications
Excels at high-speed, precise process monitoring and inspection,
•
profiling, and web-guiding applications
A comprehensive combination of scanning options:
•
– 14 measurement (“scan analysis”) modes
– 3 scanning methods
– Selectable beam blanking
– Selectable continuous or gated scan initiation
– Selectable threshold setting for semi-transparent applications
– 2 analog outputs, 2 discrete outputs, plus Modbus 485-RTU
serial output
Outstanding 4 meter range with 5 mm beam spacing
•
Available in 12 lengths from 150 mm to 2400 mm
•
Excellent 5 mm minimum object detection or 2.5 mm edge
•
resolution, depending on scanning method
Receiver user interface for quick, intuitive setup of many common
•
applications:
– 6-position DIP switch for setting scan mode, measurement
mode, analog slope, discrete output 2 option (complementary
measurement or alarm operation)
– 2 push buttons for gain method selection and alignment/
blanking
– 7 Zone LEDs for instant alignment and beam blockage
information
– 3-digit display for sensing information and diagnostics
Software PC interface available for advanced configuration setup
•
Remote teach wire option for alignment, gain settings, inverted
•
display, and DIP switch disable
