Cable information
69
Open Collector solutions
The Open Collector socket terminals of the BeoSystem 4 are used as follows:
-
PUC 1, Pin 2 = Open Collector 1, and Pin 3 = Open Collector 2; see also
page 78
.
-
PUC 2, Pin 2 = Open Collector 3, and Pin 3 = Open Collector 4; see also
page 78
.
Network Link Product Cable - direct mounting
Network Link Product Cable - RJ45 to Screw terminal
Cabling to the Open collector solution may also consist of a Network Link Product Cable in an appropriate length and terminated in an RJ45 to
Screw Terminal, that can be bought via local suppliers. The terminal shown is from
www.rs-components.com
with part no. 724-8953. The open
collectors and IR-blasters are connected as shown in the below illustration.
Pin
Colour
Description
1
White/Orange
GND
2
Orange
Open Collector (out 1 / 3)
3
White/Green
Open Collector (out 2 / 4)
4
Blue
GND
5
White/Blue
IR-blaster current PUC 1A / 2A
6
Green
GND
7
White/Brown
IR-blaster current PUC 1B / 2B
8
Brown
GND
Shield Braided shield Data GND
8
1
Text Text Text Text Text Text Tex
t Te
xt T
ext
Tex
t T
ext
Text Text Text
GND
Signal
81
87654321
8
1
8
1
Text Text Text Text Text Text Tex
t Tex
t T
ext
Tex
t T
ext
Text Text Text
Text Tex
t Text
Text Text
Text Text Text
Text Te
xt
Text
PUC A
PUC B
Open collector (Out 1/3)
Open collector (Out 2/4)
GND
GND
