Customer Service Menu
40
HW VERSIONS
This submenu shows the hardware version for the different circuit boards or modules in the system. These values are read-only and cannot be
modified through the menu.
The following options are presented under HW versions:
- Product variant
- Tuner variant
- Stand variant (if used)
- Video Engine board version (PCB01, Video Engine)
- Display type
- Extension board version (PCB59, Extension)
PRODUCT
Product variant defines in which device the hardware is used.
TUNER
Tuner variant is detected from the tuner/DVF type or e.g. factory setup. It will show one of the variants from below list:
- DVB-T2/C/S2
- No Tuners
STAND
Defines which type of stand is detected. This can be NO STAND if the stand has not been detected, or the dedicated Stand type, if recognized on
the CAN bus.
VIDEO
HW version of the Video Engine.
EXT. BOARD
HW version of the Extension board (PCB59, Extension).
DISPLAY
Defines the type of the display detected. In BeoSystem 4 OSD is used.
