![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beovision-12-65-mk-ii/beovision-12-65-mk-ii_installation-manual_3730928010.webp)
Install BeoSystem 4 with 3
rd
party TV display
10
Install BeoSystem 4 with 3
rd
party TV display
Cabling
The cabling between the BeoSystem 4 and a 3
rd
party television consists of:
Cable type
Socket on BeoSystem 4
Socket on 3rd party TV
HDMI
HDMI OUT
HDMI IN
IR blaster (6271234)
e.g. PUC 1
[to be placed in front of the
IR receiver of the TV]
IR cable BLC NL/ML, RJ45
to pigtail, 10 m / 33 ft,
White (6271239)
Connect an IR-eye without
autocontrast (8087030) to the
IR/AUTO CONTRAST socket
Cat 7 (6271026, 6271027,
6271028)
Connect an IR-eye without
autocontrast (8087030) to the
IR/AUTO CONTRAST socket
-
Note: The IR-eye used is the type without autocontrast (Part No.: 8087030), and a Network Link Product Cable (e.g. of appropriate length for
example: 10 m / 33 ft, Part No.: 6271027; 20 m / 66 ft, Part No.: 6271028) is mounted. Alternatively the IR cable RJ45, 10 m / 33 ft, Grey (Part.
No.: 6271239) may be used. See BeoLink Handbook via BeoWise for information on connection of wires.
Extending cables, see
page 11
.
CTRL 1 CTRL 2
CTRL 3
PUC 3 A+B PL 1
PL 2
PL 3
EXT IR
PUC 1
A+B
CTRL 4
PUC 2
A+B
CTRL 5
NOT
USED
PL 4
PL 5
1
2
3
4
5
HDMI IN
S/P-DIF
IN
5V
0,5A
12V=1.0A
STAND
COMMON INTERFACE
CHIPSIDE
CHIPSIDE
5V=50mA
AERIAL
14/18V=0.4A
SATELLITE
HDMI
OUT
MONITOR
CONTROL
IR/AUTO
CONTRAST
PL 6
AV
IN