How to use this installation guide 3
How to use this installation guide
This installation guide gives step by step instructions on how to:
- Mount the product,
- Understand placement rules,
- Connecting and setting up BeoLab Transmitter 1 with products and speakers,
- Use push buttons and understand LED indications,
- Use the ServiceTool and make SW update,
- Understand channel patterns and use worldwide.
Warning
Installation and replacement of parts must be made by Bang & Olufsen
certified installers only.
Navigation in this guide
When the guide is opened, it automatically opens in Full Screen Mode (can be
left as desired - see below). This is primarily done to optimise the usability of
screen reading. There are several ways to navigate when using the guide, see
the survey of keys, shortcuts and hot keys below:
/
(arrow keys on the keyboard) navigates to the next page
/
(arrow keys on the keyboard) navigates to the previous page
Esc
(
Esc
button ) exits Full Screen Mode (press
Ctrl
+
L
to return to
Full Screen Mode).
Another feature to optimise the navigation is the navigation icons at the
bottom of the screen (see below for explanation).
Navigates you to the previous view
Navigates you directly to the start page
Navigates directly to the table of contents (these are active links
- click the link to be directed directly to the associated section)
Prints the document - the print dialogue box opens (
Ctrl
+
P
also
brings up this feature)
Navigation TIP
The right side of this page and the Table of Contents,
page 30
, acts as an active table of contents. Simply click the subject you want and you are
transferred to the section in question.
Introduction
Connecting source system to BeoLab Transmitter 1
Placement of BeoLab Transmitter 1
LED indications
Site survey (Wi-Spy)
Use of USB memory stick
IR-eye - 3
rd
party product remote control
Always On
Line-in settings and log files
Use of ServiceTool
How to use this installation guide
Setting up and connecting BeoLab Transmitter 1
Push button functions
Combination of Channel pattern and product type No.
Distance between 5 GHz transmitters
Connection specifications
BeoLab Transmitter 1 front
BeoLab Transmitter 1 connection panel (rear side)
Demount from wall mounting
Mounting