Connecting source systems to BeoLab Transmitter 1 11
Audio input using Power Link - up to 11 speakers
This function is made available with the SW ver. 1.1 and newer.
Connect Bang & Olufsen audio or TV product using a Power Link cable to the
PL1
socket (stereo only signal) or Power Link cables to the
PL1
to
PL4
sockets (multi-channel) and set the
B&O INPUT
switch to
YES
.
Alternatively connect a 3
rd
party audio product using Power Link socket as Line-in and set the
B&O INPUT
switch to
NO
.
Up to 11 speakers may be arbitrarily configured to be connected to the available source channels: Examples of source input are:
- Stereo input, no bass management.
SUB 2.1
set to
OFF
. This provides a left and a right stereo sound channel.
- Stereo input, with bass management.
SUB 2.1
set to
ON
. This provides a left and a right stereo sound channel plus a subwoofer sound channel.
- Multi-channel input, up to 8 channels, see
page 7
and
page 8
.
SUB 2.1
set to
OFF
. This provides sound channels according to the
Power Link input.
Note: Observe that the distance between the BeoLab Transmitter 1 and any speaker must not exceed 12 m / 40 ft.
> continues
100 - 240V 50/60Hz
BeoMaster 5
BS 5
L
L
R
R
L
L
R
R
SUB
SUB
SUB