manualshive.com logo in svg

B&G Zeus3 Glass Helm, Operator'S Manual

Share
Download
B&G Zeus3 Glass Helm Operator'S Manual Download Page 43

Navigating

The navigation function included in the system allows you to navigate to the cursor position,
to a waypoint, or along a predefined route.
If autopilot functionality is included in your system, the autopilot can be set to automatically
navigate the vessel.
For information about positioning waypoints and creating routes, refer to 

"Waypoints, Routes, and

Tracks"

 on page 37.

Navigate to cursor position

You can start navigating to a cursor position on any chart, radar, or Echosounder panel.
Position the cursor at the selected destination on the panel, and then select the 

Goto

Cursor

 option in the menu.

Ú

Note: 

The 

Goto Cursor

 menu option is not available if you are already navigating.

Navigate a route

You can start navigating a route from the chart panel or from the 

Route

 dialog.

When route navigation is started, the menu expands and shows options for canceling the
navigation, for skipping a waypoint, and for restarting the route from current vessel position.

Starting a route from the chart panel

Activate a route on the panel, and then select the route navigation option from the menu.
You can select a routepoint to start navigating from a selected position.

Start navigating a route from the Route dialog

You can start navigating from the 

Route

 dialog, activated by:

•

Selecting the 

Waypoint

 tool from the 

Home

 page and then the 

Routes

 tab

•

Selecting the route details from the menu

Cancel navigation

When you are navigating, the menu includes an option for cancelling the navigation.

Navigating with the autopilot

When you start navigation on a system with autopilot functionality, you are prompted to set
the autopilot to navigation mode.

Ú

Note: 

The prompt to set the autopilot to navigation mode is disabled if the boat type is

set to SAIL in the Autopilot Commissioning dialog.

If you choose not to engage the autopilot or if your boat is set to SAIL, the autopilot can be
set to navigation mode from the Autopilot Controller later on. For more information about
autopilot functionality, refer to 

"Autopilot"

 on page 62.

6 

Navigating

 | Zeus3 Operator Manual

43

Summary of Contents for Zeus3 Glass Helm













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands