B&G Zeus3 Glass Helm Operator'S Manual Download | Manualshive

Page: 27 / 140

background image

Ú

Note:

All chart types work in 3D mode, but without 3D cartography for the appropriate

area the chart appears flat.

When the 3D chart option is selected, the Pan and the Rotate icons appear on the chart
panel.

Panning the 3D chart

You can move the chart in any direction by selecting the Pan icon and then panning in the
desired direction.
Select the

Return to vessel

menu option to stop panning, and to center the chart to vessel

position.

Controlling the view angle

You can control the view angle by selecting the Rotate icon and then panning the chart
panel.

•

To change the direction you are viewing, pan horizontally

•

To change the tilt angle of the view, pan vertically

Ú

Note:

When centered on the vessel position, only the tilt angle can be adjusted. The

view direction is controlled by the chart orientation setting. See

"Positioning the vessel on the

Zooming a 3D chart

You zoom in and out on a 3D chart by using the zoom panel icons or the rotary knob.

Chart overlay

Radar, structure, SonarChart Live (Navionics charts only) and weather data can be displayed
as overlay on your chart panel.
When an overlay is selected, the chart menu expands to include basic menu functions for the
selected overlay.
Radar, structure and weather functions are described in separate sections in this manual. For
more information about SonarChart Live, see section

"SonarChart Live"

PredictWind weather and routing

For information about PredictWind weather and PredictWind routing, refer to

"PredictWind"

Insight and C-MAP charts

All possible menu options for Insight and C-MAP charts are described below. The features
and menu options available can vary depending on the charts you use. This section shows
menus from an Insight chart.

Ú

Note:

A menu option is greyed out if it is not available on the chart displayed. For

example, raster charts are not available with Insight, so the Raster charts menu option is
greyed out when Insight charts are displayed.

Insight and C-MAP tides and currents

The system can display Insight and C-MAP tides and currents. With this information it is
possible to predict the time, level, direction and strength of currents and tides. This is an
important tool when considering planning and navigation of a trip.
In large zoom ranges the tides and currents are displayed as a square icon including the
letter

T

(Tides) or

C

(Current). When you select one of the icons, tidal or current information

for that location are displayed.
Dynamic current data can be viewed by zooming inside a 1-nautical mile zoom range. At
that range, the Current icon changes to an animated dynamic icon that shows the speed and
direction of the current. Dynamic icons are colored in black (greater than 6 knots), red
(greater than 2 knots and less than or equal to 6 knots), yellow (greater than 1 knot and less

Charts

| Zeus3 Operator Manual

27

«
...
25
26
27
28
29
...
»

Summary of Contents for Zeus3 Glass Helm













































































































































Reviews:

No comments

Related manuals for Zeus3 Glass Helm

Brand: P.L.Z Pages: 12

Institutional I-40 Series

Brand: Hunter Pages: 2

Brand: Daewoo Pages: 38

Brand: Audiovox Pages: 8

Brand: Lexus Pages: 6

Colorado RCR 127

Brand: Blaupunkt Pages: 23

Brand: Nakamichi Pages: 11

Brand: GliderGuider Pages: 29

Brand: Tyco Fire Product Pages: 4

Stealthbox SB-CAN-G2MVX3D/10TW3

Brand: JL Audio Pages: 6

Brand: ADAM OPEL Pages: 213

Brand: VMS Pages: 24

IVA W200 - DVD Player With LCD Monitor

Brand: Alpine Pages: 77

Brand: Alpine Pages: 100

Brand: Alpine Pages: 100

Brand: Solem Pages: 18

Brand: TCAT Pages: 27

Brand: Somogyi Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands