manualshive.com logo in svg

B&G Zeus3 Glass Helm, Operator'S Manual

Share
Download
B&G Zeus3 Glass Helm Operator'S Manual Download Page 56

Automatically download PredictWind weather files 

The automatic download feature allows your system to regularly check for weather updates
and download the latest data.
Specify if you want to automatically download High resolution (refer to 

"High resolution"

 on page

56) or Offshore - lower resolution (refer to 

"Offshore area (lower resolution)"

 on page 57) or both

types of GRIB data.

Ú

Note: 

High Resolution downloads require a PredictWind Professional subscription.

Ú

Note: 

To download data from PredictWind, the unit must have an internet connection

and your PredictWind login credentials must be entered in the system (refer to 

"PredictWind

login credentials"

 on page 55). When an internet connection is made the system will

automatically login to PredictWind with your credentials and start downloading weather
data as specified in the PredictWind GRIB Weather dialog.

Manually download PredictWind weather files

To download a PredictWind weather file manually, select the Download forecast option in
the Chart menu to display the Select forecast type dialog. Use the Select forecast type dialog
to specify the type and area. 

Ú

Note: 

To manually download data from PredictWind, the unit must have an internet

connection. The Download forecast option is only available if you have turned on GRIB
weather overlay on the Chart menu (refer to 

"Turn on GRIB weather overlay"

 on page 55), and

your PredictWind login credentials are entered in the system (refer to 

"PredictWind login

credentials"

 on page 55).

When the GRIB download is complete, the MFD will display a message to show the task is
complete. To view the downloaded GRIB file on the chart, select the downloaded file from
the 

Forecast

 menu option. Refer to 

"Specify PredictWind GRIB overlay file"

 on page 58.

High resolution

Download location areas are displayed on the chart. Select or deselect single or multiple
locations. The selected areas are highlighted. You can add and remove locations by selecting
Automatic download locations later.

56

PredictWind

| Zeus3 Operator Manual

Summary of Contents for Zeus3 Glass Helm













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands