![background image](http://html1.mh-extra.com/html/bandelin/sonopuls-hd-5020/sonopuls-hd-5020_instructions-for-use-manual_3784270014.webp)
4
/
Preparation for operation
14/36
51846-000 en/2022-07
4.4 Switching the device on and off
Switching on the ultrasonic homogeniser for the first time
Allow the device to stand for 2 hours at its operating location before switching it
on so that it can adapt to the climatic conditions.
1. Switch on the device using the mains switch on the rear of the ultrasonic gen-
erator.
» The "Language" screen appears.
2. Select your language.
» The "Time/Date" screen appears.
3. Tap the values to be changed. Enter the desired values. Confirm the entries
with the "Confirm/Save" button. Exit the "Time/Date" screen by pressing the
"Confirm/Save" button.
» The startup screen appears.
If the language and time are set, the startup screen will appear immediately the
next time the device is switched on. If the startup screen does not appear, see
Switching the ultrasonic homogeniser off
Switch off the device using the mains switch on the rear of the ultrasonic genera-
tor.
4.5 Select probe
The control unit of the device automatically detects the connected ultrasonic con-
verter. The mounted probe must be selected via the touchscreen.
1. On the startup screen, tap "Probe".
2. Select the probe used.
3. Confirm your entry with the "Confirm/Save" button.