background image

5

 

/

 

Operation

22/36

51846-000 en/2022-07

5.6.5 Set sleep mode

To save energy, the device will go into a sleep mode after a while. The touch-

screen switches off in sleep mode. Wake up the device by tapping the touch-

screen. The time of inactivity after which the sleep mode starts can be adjusted.

1. On the startup screen, tap “Settings”.

2. Tap on “System".

3. Tap "Sleep Mode".

4. Enter the desired switch-off time.

5. Confirm your entry with the "Confirm/Save" button.

5.6.6 Configuring the network

1. On the startup screen, tap “Settings”.

2. Tap on “System".

3. Tap "Interface".

4. Tap on "Network".

5. Activate "DHCP" if you want the device to automatically obtain the network 

settings. You can enter the IP address, DNS addresses and netmask manually 

if you deactivate "DHCP".

6. Switch the device off and on again for the new settings to take effect.

5.6.7 Set temperature unit

You can select either Fahrenheit or Celsius as the displayed temperature unit.

1. On the startup screen, tap “Settings”.

2. Tap on “System".

3. Tap "Units".

4. Select the desired temperature unit.

5. Confirm your entry with the "Confirm/Save" button.

Summary of Contents for SONOPULS HD 5020





































Reviews: