51846-000 en/2022-07
13/36
Preparation for operation
/4
Fig. 3
Removing standard horn or booster horn
1. Unscrew the standard horn or booster horn by hand.
2. Clean the mounting surfaces of the ultrasonic converter and the standard
horn or booster horn, as well as the thread of the threaded pin, with a lint-
free cloth soaked in alcohol.
3. Screw the standard or booster horn hand-tight into the ultrasonic converter.
4. Place a sickle spanner on the ultrasonic converter. Place the ultrasonic con-
verter on a fixed tabletop and support the sickle spanner on the tabletop.
5. Place a sickle spanner on the standard horn or booster horn. Tighten firmly.
Use of a torque wrench (Code No. 3662) is recommended. The required tight-
ening torque can be found in the product information supplied with the stand-
ard horn or booster horn.
Fig. 4
Tightening standard horn or booster horn
A video is available for mounting and disassembling the standard
horn or booster horn:
https://www.youtube.com/watch?v=NXbGc6nAb5c
