![background image](http://html1.mh-extra.com/html/bandelin/sonopuls-hd-5020/sonopuls-hd-5020_instructions-for-use-manual_3784270019.webp)
51846-000 en/2022-07
19/36
Operation
/5
5.4.4 Starting a program
To start set and activated programs in the specified sequence, proceed as fol-
lows:
Requirement
• The probe tip is immersed in the sonicating medium; see
.
• At least one program is activated and a space is assigned in the sequence; see
Activating and deactivating a program
.
1. On the startup screen, tap "Programs".
» The "Programs" overview screen is shown. The sequence of activated pro-
grams is displayed at the top.
2. Tap the “Start” button.
» The "Sonication" screen appears with the settings of the first activated pro-
gram in the specified sequence. The individual parameters can still be
changed by tapping one of the buttons "Amplitude," "Power," "Time," "Pul-
sation" or "Temperature". Confirm the new settings by tapping the "Con-
firm/Save" button.
3. Optional: Tap one of the buttons "Amplitude," "Power," "Time," "Pulsation" or
"Temperature" to change the preselected settings for the first program. Con-
firm the new settings by tapping the "Confirm/Save" button. The changed
parameters now only apply to the current sonication process. The parameters
stored in the programs remain unchanged.
4. Tap the “Start” button.
» The sonication begins.
» The sonication ends automatically after completion of the activated pro-
grams.
» You can interrupt the sonication at any time with the "Pause" button or end
it with the "Stop" button.
» After the end of sonication, a screen with a summary of the sonication
appears.
5. Tap the "Confirm/Save" button.
» The "Sonication" screen appears again.