![background image](http://html1.mh-extra.com/html/bandelin/sonopuls-hd-5020/sonopuls-hd-5020_instructions-for-use-manual_3784270016.webp)
5
/
Operation
16/36
51846-000 en/2022-07
5.2.2 Enter sonication time
1. On the startup screen, tap "Parameters".
2. Tap on "Time".
3. Make the desired settings for the sonication time.
» A time setting is only effective if "Continuous operation" is not activated.
4. Confirm your entry with the "Confirm/Save" button.
5.2.3 Set pulsation
The sonication can be switched on continuously or in pulses.
1. On the startup screen, tap "Parameters".
2. Tap "Pulsation".
3. Turn pulsation on or off.
4. Enter how long you want the sonication to be alternately switched on and off.
5. Confirm your entry with the "Confirm/Save" button.
5.2.4 Setting temperature monitoring
If you use a temperature sensor, you can monitor the temperature of the sonicat-
ing medium during sonication. You can set whether the ultrasound is switched off
or only a warning tone is emitted when a limit value between 0 °C and 100 °C is
reached. To do this, connect the TM 5000 temperature sensor to the lid of the
respective ultrasonic converter after removing the dust cap. The temperature
now appears on the display.
1. On the startup screen, tap "Parameters".
2. Tap “Temperature.”
3. Make the desired changes. To set the temperature, you can move the bar or
enter a numerical value.
4. Confirm your entry with the "Confirm/Save" button.