51806-001 en/2021-12
27 / 43
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
Housing
• Do not use abrasive cleaners, only use commercially-available care products without
scouring agents.
• Wipe the housing only from the outside with a moist cloth; if needed, use a suitable
surface disinfectant, then allow to dry or rub dry.
5.2 Disinfection
If disinfection of the ultrasonic bath is not performed correctly or regularly, there is a risk
of microorganisms colonising the device and causing microbiological contamination,
particularly on the rim of the bath and around the out
fl
ow, which can result in a cross
infection. Consequently, the baths and surfaces of the device must be disinfected
and cleaned regularly. The disinfection should be performed regularly by the operator
in accordance with the hygiene plan and using a VAH-certi
fi
ed
1
or e
ff
ective surface
disinfectant.
5.3
Warehousing / Storage
During long periods of non-use, the ultrasonic bath should be disconnected from the mains
and stored in a cool, dry location.
During storage and transportation, make sure that frost does not form due to the residual
liquid left in the ultrasonic bath!
The lid should be placed on top in order to protect the oscillating tank from outside
contamination.
1 VAH: Verbund für angewandte Hygiene (Alliance for Applied Hygiene) / Germany
