16 / 43
51806-001 en/2021-12
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.3
Operating modes
The operation of the SONOCOOL ultrasonic bath is conducted using four di
ff
erent
operating modes.
Name and sample display
Brief description / display
To get there from…
Stand-by mode
Basic state of the ultrasonic bath.
The runtime (shown inverted)
and the current temperature are
displayed in the upper part of
the display. The target values for
the time, temperature and power
are displayed in the bottom part.
The cooling is activated, the
ultrasound is turned o
ff
.
- After turning on
+ initialisation
- When the runtime
has elapsed
- When interrupting
a process from
the Pause mode
+ pressing and
holding the [SET]
key for a long time
Editing mode
Menu to change the operating
parameters (see chapter 3.4).
The selected parameter and
the current value are shown on
the top portion of the display.
All valid target values are shown
on the bottom rows.
- Stand-by mode
+ [SET] key
- Active mode
+ [SET] key
- Pause mode
+ [SET] key
Active mode
Ultrasound is activated.
The residual runtime ( remaining
runtime) is shown in non-inverted
format and runs as a second-by-
second countdown. Below it, the
actual temperature is displayed.
All valid target values are shown on
the bottom rows.
- Stand-by mode
+ [START/STOP] key
- Editing mode (from
Stand-by and Pause)
+ [START/STOP] key
- Pause mode
+ [START/STOP] key
Pause mode
Interruption of the active mode
The remaining runtime is shown in
inverted form (dark text on a light
background). The process can be
continued thereafter.
The display is similar to the one
for Stand-by mode; however
the message "p-a-u-s-e" appears
on the next to last row.
- Active mode
+ [START/STOP] key
12:00:00 17.0°C 50%
Temperature:
17.2°C
17
12:00:00 17.0°C 50%
12:00:00
17.2°C
12:00:00
12:00:00 17.0°C 50%
11:59:57
17.2°C
12:00:00 17.0°C 50%
===== p-a-u-s-e =====
12:00:00
17.2°C
09:15:21