ABOUT YOUR B&D OPENER
Thank you for choosing a B&D automatic garage door opener. This automatic garage door opener has been
designed and developed in Australia by B&D Doors.
The technically advanced construction of this B&D opener ensures you enjoy the following benefits:
•
5 year full parts and labour warranty on motor, electronics and mechanical components of the opener when
installed by an authorised B&D Dealer (conditions such as having the garage door serviced annually also apply).
•
Your own private security code with 3.486 billion available codes, meaning only you can open your garage door.
Allows you to electronically program your security code at the touch of a button.
•
Standard multi channel remote control transmitter allows you to operate other devices such as an adjoining
garage door or entry gate if automated.
•
Automatic safety reverse ensures personal protection from death or serious injury if trapped under a door while
closing.
•
Courtesy light automatically switches on for approximately 4
1
/
2
minutes when operating the door. Can be
programmed to turn on and off from a remote control transmitter.
•
Emergency disengagement release handle (red knob) for manual operation of the door in the event of a power
failure.
•
Automatic memory of all remote control transmitter codes and door travel limits after a power failure.
•
No need to manually lock your garage door, as the opener ‘positively’ locks the door when closed.
•
Automatically compensates for changes in door operating characteristics.
•
Auto closing option can be programmed to close the door approximately 30 seconds after the door has opened.
N.B. Safety Infra Red beams must be installed for this option to function.
•
Flashing LED’s to easily identify operational problems or service requirements.
•
An external antenna can be connected – for sites where radio range can be a problem.
•
Vacation mode can be programmed to disable the radio receiver.
•
Door Open Output – for those situations when you need to know when the door is open.
•
Auxilliary Output – you can can program a spare button of your remote control transmitter to operate this output
to control items that can be switched using a momentary closed contact.
SPECIFICATIONS
Maximum Door Size and Door Load
3000mm high Residential Rolling Garage Door or
2400mm high Wind Lock Residential Rolling Garage Door that does
not exceed 200N (20kgs) bottom rail load
Supply Voltage
220 – 240 volts AC – 50/60 Hz
Current
Maximum 3.5 Amps
Lamp
One 25 watt Pilot Lamp, on when door starts, off approx. 4
1
/
2
minutes later or can be programmed to operate from a remote
control transmitter
Limit Adjustment
Electronic
Remote Control Transmitter Frequency
433.92 MHz
Powerhead Weight
8.75 kgs
Auxilliary Power Supply
12 volt, 100mA – protected by a 200mA polyfuse
Door Open Indicator Supply
Open collector isolated transistor, 30v, 100mA, connected to common
when door is closed
Auxilliary Output Supply
Opto-isolated transistor, 30v, 100mA, connected to common when
activated
External Aerial Connection
Female TV Coax Connector
AS3350
©Copyright 2003
3
Part No 059778
