baltur 56495410, Installation, Use And Maintenance Instruction Manual

Page: 89 / 112

ENGLISH
33 / 54
0006081544_201907
CONTROL AND COMMAND EQUIPMENT LME 73...
↵
Info
for more information, refer to the machine quick Guide supplied with the manual.
The release button (info button) is the key element for unlocking the burner control and activating/deactivating the
diagnostic functions.
The warning light (LED) is the key element for visual diagnostics.
RED
YELLOW
GREEN
Both the lockout reset buttons and the multi-coloured light (LED) are located in the control panel
There are two diagnostics choices:
1. Visual diagnostics: indication of the operating status or diagnostics of the lockout cause.
2. Diagnostics: display and operating unit through BCI up to AZL2 ...
Visual diagnostics: during normal operation, the various operating statuses are indicated by colour codes according to the colour table
below.
OPERATING STATUS INDICATIONS
During ignition, the following status indications are provided as per the table below:
Colour code table for the warning light (LED).
Condition Colour sequence Colours
Waiting conditions TW, other intermediate conditions . . . . . . . . No light
Ignition phase Intermittent yellow
Correct operation, current strength of flame detector above the
minimum allowed
Green
Incorrect operation, current strength of flame detector below the
minimum allowed value
Intermittent green
Decrease in power supply voltage Alternating Yellow
and Red
Burner shut down condition Red
Fault indication (see colour key) Intermittent red
Extraneous light upon burner start-up Alternating Green
and Red
Quick flashing for diagnostics Quick flashing red
NO LIGHT. RED. YELLOW. GREEN.