TrilliumSeries™ Adiabatic
Cooler - TRF Operation & Maintenance Manual
–
Component Information & Maintenance
Page | 39
2.
Place a lever made of non-electrically conductive material on the negative pole of the battery holder below the
battery.
3.
Lift the battery side out of the holder. The battery is now in an inclined position as shown in
Figure 24. PLC Battery Change
4.
Remove the battery completely from the battery holder.
5.
Insert the new battery with the correct polarity back into the inclined position on the positive pole of the battery
holder. The correct polarity is shown in
6.
Push the protruding side of the battery into the battery holder as shown in
7.
To dispose of the battery, remove it, tape off the poles and put it in the battery disposal.
