Balluff IO-Link BLA D Series, User Manual

Page: 43 / 48

www.balluff.com 19 english
For the analog and object output values, the different
modes can be selected via the following settings:
Value Mode Value Mode
0 Disable 6 Slit
1 Left object 7 Object position
2 Left slit 8 Slit position
3 Right object 9 Objects counting*
4 Right slit 10 Slits counting*
5 Diameter 11 Any object*
Tab. 6-7: Object output modes
*: Modes 9, 10 and 11 are not available for the analog
output values.
6.3.4 Diagnostic data
The data described in the diagnostic area may be accessed
through following indices:
Index Name Sub-
index
Size Access
0x52 Temperature
- Up-to-date
1 UINT16 R
- Min. since power-on 2 UINT16 R
- Max. since power-on 3 UINT16 R
- Min. since first start-up 4 UINT16 R
- Max. since first start-up 5 UINT16 R
0x53 Temperature alarm value
- Lower limit
1 UINT8 R
- Upper limit 2 UINT16 R
0x54 Laser
- Status
1 UINT32 R
- ID 2 UINT32 R
- Serial number 3 UINT32 R
- Operating time [s] 4 UINT32 R
- Number of switch-on
procedures
5 UINT32 R
- Operating current 6 UINT32 R
- Temperature 7 UINT32 R
- Error 8 UINT32 R
0x57 Operating time
- since power-on [s]
1 UINT32 R
- total [s] 2 UINT32 R
- since maintenance [s] 3 UINT32 R
0x58 Switch-on procedures
- total
1 UINT32 R
- since maintenance 2 UINT32 R
0xE0 Optical properties
- Ambient light minimum
1 UINT16 R
- Ambient light maximum 2 UINT16 R
- Laser light minimum 3 UINT16 R
- Laser light maximum 4 UINT16 R
- Sampling period in 0.1 ms 5 UINT16 R
Tab. 6-8: Diagnostic data
6
IO-Link interface (continued)
BLA Series D
Balluff Light Array