Balluff IO-Link BLA D Series, User Manual

Page: 40 / 48

16 english
Diagnostic Diagnostic data
Live Live image (Monitor)
Signal Info Light band characteristics
Amb. Ambient light min. and max.
Sig. Signal min. and max.
Period Sampling period
Device Status Device Status
PU Hours since power up
LT Life time in hours and number of
starts
SV Hours and number of starts since
reset of the service interval
Device Info Device information
BLA … Type code
SN Serial number
HwRev. Hardware Revision
FwRev. Firmware Revision
Temperature Temperature
PU Min. and max. temperature since
switching on
LT Min. and max. temperature in live
time
TH min. and max. temperature for the
error message
Transmitter Status Transmitter status
Ib Transmitter current
Temper. Transmitter temperature
Errors Number of errors that occurred
Transmitter Info Transmitter information
ID ID number
SN Serial number
Time Transmitter operating hours
OnCnt Number of starts of the transmitter
Lock Operation locking
Lock Lock settings
Unlock Edit settings
* are only available for the standard variant.
5.3 Display settings
The menu item "Display" allows you to set the display cha-
racteristics. The item "Sleep Time" can be used to set the
time until the display switches off automatically after the last
keystroke. The item "Rotation" allows to rotate the display
by 180° in order to facilitate the reading of the menu in case
the device is mounted upside down. The "Contrast" setting
allows you to adjust the contrast or brightness of the dis-
play.
5.4 Locking operation
Input via the control panel can be locked under the item "Lock"
to protect the device against unintentional adjustment. A pad-
lock symbol in the upper right corner of the display indicates
that the unit is locked. The lock can be removed with "Unlock".
For IO-Link devices, the lock function can also be activated via
the IO-Link parameterization. It is also possible to lock the local
user interface. With this function, the keys on the device can be
completely locked and also unlocked only via IO-Link.
5.2 Menu structure
By pressing the • key, you move from the measured value
display to the menu. This is structured as follows:
Device settings Description/Indication
Normalize Signal normalizing
Display Change display settings
SleepTime Time till automatic display turn-off
Rotation Rotate display
Contrast Change contrast / brightness
Blanking Restrict measuring field
left Restriction from the left
right Restriction from the right
Analog outputs Configuration of analog outputs
(voltage, current) *
AOut1 Analog output 1
(0..10 V, 10..0 V, 20..4 mA, 4..20 mA)
AOut2 Analog output 2
(0..10 V, 10..0 V, 20..4 mA, 4..20 mA)
Analog calibrate Calibration of the analog outputs*
A1 calibrate U Output 1 – Output voltage
Min Minimum value
Max Maximum value
A1 calibrate I Output 1 – Output electricity
Min Minimum value
Max Maximum value
A2 calibrate U Output 2 – Output voltage
Min Minimum value
Max Maximum value
A2 calibrate I Output 2 – Output electricity
Min Minimum value
Max Maximum value
Digital outputs Configuration of digital outputs*
DO1 PNP, NPN, Aus
DO2 PNP, NPN, Aus
DO3 PNP, NPN, Aus
Reset Reset application
Restart App Restart the measuring functions
Restart Restart the device
Reset Service Resetting the maintenance interval
Default Settings Reset to factory defaults
Output settings Configuration of the measuring
modes and output values
Analog output 1 Analog output 1
Mode Mode
Average Averaging over several measurements
Scale Scale
Offset Offset
Analog output 2 Analog output 2
Mode Mode
Average Averaging over several measurements
Scale Scale
Offset Offset
Digital outputs Object recognition
Mode Mode
Object Objekt number
Size Characteristic value
Tolerance Tolerance
5
Display and menu (continued)
BLA Series D
Balluff Light Array