Balluff IO-Link BLA D Series, User Manual

Page: 42 / 48

18 english
6.3.3 Parameter data
The device can be completely configured by setting the parameter data (see table below):
Tab. 6-6: Parameter data
* refers to the light band length L in 0.1 mm step (See Tab. 4-2).
6
IO-Link interface (continued)
Index Name Sub-
index
Size Access Range of values/
Bit No.
Default
setting
Note
0x0C Lock settings Bitmaske:
UINT16
R/W
Locking parameter write access R/W Bit 0 0 0 … unlocked 1 … locked
Locking data storage R/W Bit 1 0 0 … unlocked 1 … locked
- Device Lock R/W Bit 2 0 0 … unlocked 1 … locked
- Keyboard Lock R/W Bit 3 0 0 … unlocked 1 … locked
0x50 Display Parameter
- Sleep Time 1 UINT8 R/W 0-2 0 0 … 1 min 1 … 5 min 2 … 15 min
- Rotation 2 UINT8 R/W 0-1 0 0 … unlocked 1 … locked
- Contrast 3 UINT8 R/W 0-23 0
0x64 Blanking
- Blanking left 1 UINT32 R/W 0-L* 0 Value in 0.1 mm steps
- Blanking right 2 UINT32 R/W 0-L* 0 Value in 0.1 mm steps
- Blanking active 3 UINT8 R/W 1 0 … unlocked 1 … locked
0x65 Analog output value 1
- Mode 1 UINT8 R/W 0-8 1 Assignment (See Tab. 4-1)
- Averaging 2 UINT16 R/W 0 Number of measurements
- Scaling 3 FLOAT R/W 1.0 Scaling factor
- Offset 4 INT32 R/W 0 Offset value
0x66 Analog output value 2
- Mode 1 UINT8 R/W 0-8 3 Assignment (See Tab. 4-1)
- Averaging 2 UINT16 R/W 0 Number of measurements
- Scaling 3 FLOAT R/W 1.0 Scaling factor
- Offset 4 INT32 R/W 0 Offset value
0x68 Object output value
- Mode 1 UINT8 R/W 0-10 5 Assignment (See Tab. 4-1)
- Object diameter or slot width for
simultaneous object counting
2 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Tolerance for simultaneous
object counting
3 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
0x69 Object detection / characteristic value
- Object 1 1 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 2 2 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 3 3 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 4 4 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 5 5 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 6 6 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
0x6A Object detection Tolerance
- Object 1 1 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 2 2 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 3 3 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 4 4 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 5 5 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
- Object 6 6 UINT16 R/W 0-L* 0 Value in 0.1 mm steps
BLA Series D
Balluff Light Array