Balluff BOS R254K-UUI-LH10-S4, Manual

Page: 121 / 196

www.balluff.com 23 english
4
Primary Device Functions (continued)
4.2 Device Discovery
4.2.1 Description
With the Ping function, an IO-Link device can be found
again by starting signaling on the LED of the device by
means of a system command.
4.2.2 ISDU
Name Index Subindex Access Length Data Type Data
Storage
Default
Ping Timeout 0x00FE (254) 0 R/W 2 bytes INT Yes 1
Tab. 4-2: Device detection – ISDU
Ping Timeout
The Ping Timeout parameter sets the duration of the ping
signal that is displayed via LEDs.
The value is specified minutes. The value range from 0 to
30 minutes is allowed. If the parameter is set to 0, the ping
signal is deactivated. The parameter is reset by Application
Reset and Factory Reset (also see section Reset
Commands on page 81).
4.2.3 System Commands
Command Value Device Action
0xAF (175) Start Ping
Tab. 4-3: Device detection – System Commands
BOS R254K-UUI-LH10-S4
Photoelectric Sensors