BIS U-602_ Processor Unit
TCP/IP / RS232
44
No.
Meaning
Remedy
Communication between application and device
6
Interface error
(e.g. parity or stop bit error).
Check the interface settings in the controller
and the device,
check the cable connections.
7
Telegram format error.
Unexpected character received (e.g. too
many characters, too few characters,
incorrect characters).
Correct the structure of the telegram.
8
CRC-16 is preset and the calculated CRC
checksum does not match the checksum
that was received.
Correct the CRC calculation,
check the communication connection.
P
Standby is on and a forbidden command
is received.
Switch off standby,
activate automatic mode.
R
The asynchronous detection command is
active and a forbidden command is
received.
Send stop,
repeat command.
System diagnostics
9
Cable break.
Check the connection on the antenna and
the antenna cable.
C
Error when reading or writing parameters
from the internal memory.
Reset.
Contact Balluff service department.
D
Arbitrary device behavior.
Reset.
Contact Balluff service department.
8
Device Function
Summary of Contents for BIS U-6020-053-10 RS232
Page 2: ...www balluff com...