BIS U-602_ Processor Unit
TCP/IP / RS232
6
Installation and startup
Installation and startup are to be performed by trained technical personnel only. Any damage
resulting from unauthorized manipulation or improper use voids the manufacturer's guarantee
and liability claims against the manufacturer.
When connecting the processor unit to an external controller, observe proper selection and
polarity of the connection as well as the power supply (
The processor unit may only be used with approved power supplies (
).
Caution!
The antennas of the identification system BIS U transmit ultra-high frequency
electromagnetic waves.
IEC 62369 stipulates that personnel must not remain within close range of the UHF
antenna for long periods (several hours).
For operation within the European Community:
When selecting the installation position for the processor unit, make sure that the
minimum distance between the UHF antenna and the workplace is 26 cm.
The radiated power must not exceed the maximum permitted limit values:
– 0.5 watts
ERP
for antennas with an opening angle > 70°.
– 2.0 watts
ERP
for antennas with an opening angle ≤ 70°.
For operation within the People's Republic of China:
When selecting the installation position for the processor unit, make sure that the
minimum distance between the UHF antenna and the workplace is 26 cm.
The radiated power must not exceed the permissible limit value of 2 watts
ERP
.
For operation in the USA, Canada, Mexico, Argentina, Brazil, Japan and
Australia:
When selecting the installation position for the processor unit, make sure that the
minimum distance between the UHF antenna and the workplace is 30 cm.
The radiated power must not exceed the permissible limit value of 4 watts
EIRP
.
Note
See the "Basic UHF manual" for more information on minimum/maximum distances
and antenna power.
2
Safety
Summary of Contents for BIS U-6020-053-10 RS232
Page 2: ...www balluff com...
