www.balluff.com
BIS U-602_ Processor Unit
TCP/IP / RS232
23
Carrier follow-up time
Follow-up time in seconds of the switched-on antennas after the command is sent. The read or
write command should be executed within this time after detection.
Factory setting:
5 seconds
Max. number of tags at the same time
Maximum number of expected data carriers in the field.
Factory setting:
128
Environment
Rereadings factor (only for "Asynchronous detection").
Number of rereadings after which a data carrier is reported as present (tag coming) or number of
failed rereadings after a data carrier is reported as absent (tag going). Refer also to
nous detection (CA)" on page 32
Factory setting:
5
ETSI channels
The channel setting determines the channel assignment. If multiple channels are activated, the
device automatically selects them by means of the frequency hopping method.
Factory setting:
channel 4 switched on, channels 7…13 switched off
Note
The ETSI channels selection is only available when using the devices within the Euro-
pean Community.
7.4 Device Settings
Filtering field
7
Setting the Processor Unit Parameters
Summary of Contents for BIS U-6020-053-10 RS232
Page 2: ...www balluff com...
