Balluff BCM R15E-00 Series, User Manual

Page: 65 / 96

www.balluff.com 17 english
4.3 Electrical connection
Fig. 4-8:
4
3
1
Pin assignments for connector (pin side view)
Pin Wire color Signal
1 Brown +24V (operating voltage UB+)
3 Blue GND (operating voltage UB-;
reference potential)
4 Black C/Q (IO-Link)
Tab. 4-1: Plug connector pin assignment
4.4 Cable routing
Cable length
Cable length max. 20 m.
Cable routing
NOTICE
Damage to the sensor
Excessive strain on the cable can damage the sensor.
►
The cable must be routed tension-free.
►
Avoid tensile forces on the cable (observe a
maximum tensile load of 20 N).
Do not route the cable between BCM and IO-Link master
or between IO-Link master and controller/Edge gateway
near high voltage cables (inductive interference can occur).
The cable must be routed such that it is free of tension
(tensile force < 20 N).
Bending radius for fixed cable
The bending radius for a fixed cable must be at least three
times the cable diameter.
Bending radius for flexible routing
The bending radius for flexible cable routing must be at
least five times the cable diameter.
4
Installation and connection (continued)
BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor