Care2
Installation Instructions
52
Care2 issue 9
3. When finished renaming the Outstations, scroll up until
“Save and Exit” is displayed.
Figure 4.23 — Save and Exit Outstation 1 Parameters
Press the Encoder to save the changes made.
N
OTE
: The name length for each Outstation is 13 Characters. Add blank
spaces if required to ensure the name is the correct length.
N
OTE
: To Exit without saving the changes select "Exit Without Save"
and press the encoder.
4.7.1 ASCII Character Set
Figure 4.24 — ASCII Character Set showing Character Order
Figure 4.24 shows the order of the characters when the encoder
is turned Clockwise.
The “DEL” character (when selected) allows the operator to go
back a single character to change it.
