Care2
Installation Instructions
Care2 issue 9
51
4.7 M
ANUALLY
R
ENAME
R
EMOTE
U
NITS
N
OTE
: The Outstation Names are normally specified during the SD or IP
Configuration. This procedure shows how to manually change the
outstation name using the front panel controls.
Follow steps (1) to (6) of the Auto Assign Procedure (page 45) to
open the “Line Parameters” menu.
1. Select the line required (in this example Outstation 1) and
the parameters for that line will be displayed.
Figure 4.20 — Line Parameters for Outstation 1
2. Scroll down until the name is selected and press the encoder.
Figure 4.21 — Current Name of Line 1 Highlighted
Scroll up and down to change each character in turn and
press the encoder to move onto the next character.
Figure 4.22 — Renaming Line 1
