Care2
Installation Instructions
Care2 issue 9
45
4.5 A
UTO
A
SSIGN
O
UTSTATIONS
N
OTE
: When the Console boots up this procedure is performed
automatically and the Console will ADD new Outstations.
Manually initiating this procedure enables the Console to REMOVE
outstations that are not connected.
1. Ensure the Console Telephone Door is closed and latched.
2. The Display may be showing the Screen Saver as shown in
Figure 4.8 — Display showing Screen Saver.
Move the encoder so the display becomes active and displays
the Main Menu as shown in Figure 4.9.
Figure 4.9 — Display showing Main Menu
3. Press the encoder to select the “System” option.
Figure 4.10 — Enter PIN number
The system will ask for a PIN number.
The default PIN is 5555.
