background image

- 6 -

- 7 -

- 5 -

1. Network 

Configuration

4) ‘Operation successful’ will be reported if it’s done properly.

Note:

If you want to quit, press 

‘**’

.

1.5 DNS

1) Pick up phone and press 

‘****’

 to start IVR;

2) Choose 

‘1’

 and then 

‘5’

, and the VIP-1000PT/VIP-1000T will report on 

the current 

DNS

.

3) Input the new DNS and end with 

‘#’

.

  Use 

‘*’

 to replace 

‘.’

. User can input 

192*168*20*1

 to set the 

new DNS 

192.168.20.1

.

  Press  the 

‘#’

 key to indicate that you have finished.

4) ‘Operation successful’ will be reported if it’s done properly.

Note:

If you want to quit, press 

‘**’

.

2. Phone Port 

Configuration

2.1 Phone Number

1) Pick up phone and press 

‘****’

 to start IVR;

2) Choose 

‘2’

 and then 

‘1’

, and the VIP-1000PT/VIP-1000T will report on 

the current 

Phone Number

.

Note:

If you want to quit, press 

‘**’

.

2.2 Server IP Address

1) Pick up phone and press 

‘****’

 to start IVR;

2) Choose 

‘2’

, and the VIP-1000PT/VIP-1000T will report on the current 

Server IP Address

.

Note:

If you want to quit, press 

‘**’

.

3. Factory 

Reset

1) Pick up phone and press 

‘****’

 to start IVR.

2) Choose 

‘3’

, and the VIP-1000PT/VIP-1000T will report on 

‘Factory 

reset’

.

3) At the prompt, 

please enter password

. Please refer to Operation 1 

for the password input.

4) ‘Operation successful’ will be reported if password is right and then the  

VIP-1000PT/VIP-1000T will be set to factory default.

5) Press 

‘4’

 to reboot to make changes effective.

Note:

If you want to quit, press 

‘**’

.

4. Reboot

1) Pick up phone and press 

‘****’

 to start IVR;

2) Choose 

‘4’

, and the VIP-1000PT/VIP-1000T will report on 

‘Reboot’

.

3) At the prompt, 

please enter password

. Refer to Operation 1 for the 

password input.

4) The VIP-1000PT/VIP-1000T will reboot if password is right and 

operation is done properly.

Note:

If you want to quit, press 

‘**’

.

5. WAN

Port Login

1) Pick up phone and press 

‘****’

 to start IVR;

2) Choose 

‘5’

, and the VIP-1000PT/VIP-1000T will report on the 

‘WAN 

Port Login’

;

3) At the prompt, 

please enter password

. Please refer to Operation 1 

for the password input.

4) ‘Operation successful’ will be reported if operation is properly done.
5) At the prompt 

‘1-enable 2-disable’

, choose 1 or 2, and end with 

‘#’

.

6) ‘Operation successful’ will be reported if it’s done properly.

Note:

If you want to quit, press 

‘**’

.

6. Web

Access Port

1) Pick up phone and press 

‘****’

 to start IVR;

2) Choose 

‘6’

, and the VIP-1000PT/VIP-1000T will report on 

‘Web 

Access Port’

.

3) At the prompt, 

please enter password

. Please refer to Operation 1 

for the password input.

4) ‘Operation successful’ will be reported if operation is properly done.
5) Reports on the current 

Web Access Port

;

6) Set the new 

Web access port

 and end with 

‘#’

.

7) ‘Operation successful’ will be reported if it’s done properly.

Note:

If you want to quit, press 

‘**’

.

7. Software 

Version

1) Pick up phone and press 

‘****’

 to start IVR.

2) Choose 

‘7’

, and the VIP-1000PT/VIP-1000T will report on the current 

‘Firmware version’

.

Note:

If you want to quit, press 

‘**’

.

 4. NOTICE

 In the Voice menu, press 

*

(asterisk) to return to the up level menu.

 If any changes are made in the IP assignment mode, please reboot the VIP-1000PT/

VIP-1000T to take effect the settings.

 When entering IP address or subnet mask, input 

‘*’

 to represent 

‘.’

 and add 

‘#’

 to 

finish  inputting,  for  example,  to  enter  the  IP  address 

192.168.1.11

, press these 

keys:

192*168*1*11#

.

  You  can  enter  the  password  by  phone  keypad;  the  matching  table  between  numbers 

and letters are as follows:

 To input: A,B,C,a,b,c------press ‘2’

 To input: D,E,F,d,e,f------press ‘3’

 To input: G,H,I,g,h,i------press ‘4’

 To input: J,K,L,j,k,l------press ‘5’

 To input: M,N,O,m,n,o------press ‘6’

 To input: P,Q,R,S,p,q,r,s------press ‘7’

 To input: T,U,V,t,u,v------press ‘8’

 To input: W,X,Y,Z,w,x,y,z------press ‘9’

 To input all other characters in the administration password------press ‘0’.

 Press the 

‘#’

(pound)  key  to  indicate  that  you  have  finished  entering  the  IP  address  or 

subnet mask or other settings.

 When assigning IP address in static IP mode, customer must set IP address, subnet 

mask  and  default  gateway.  If  in  DHCP  mode,  please  make  sure  that  DHCP  server  is 
available in your existing broadband connection to which WAN port of the VIP-1000PT/

VIP-1000T is connected.

 Further Information

For  further  configuration,  please  refer  to  the  user’s  manual,  which  can  be  downloaded 

from the website.
http://www.planet.com.tw/en/support/download.php?type1=372&model=48762&type=3

If  you  have  any  other  question,  please  contact  the  dealer  where  you 
purchased  this  product  or  you  can  contact  PLANET  directly  at  the 
following email address: [email protected]

2011-D10570-001

Summary of Contents for VIP-1000 Series









Reviews: