Care2
Installation Instructions
Care2 issue 7
79
7 Faults and Maintenance
7.1 A
CCEPT
A
F
AULT
& S
ILENCE
THE
S
OUNDER
If a fault is detected the relevant Fault LED on the Front Panel will
illuminate (as shown in Figure 3.2 on page 32), the LCD Display
will display the detected fault and the Fault Sounder will sound.
Press and hold the Encoder for three seconds to accept the Fault
and silence the Fault Sounder.
7.2 R
E
-
ANNOUNCING
F
AULTS
If a Fault is accepted (but not cleared) it will be re-announced
after the time delay set in the “Fault Repeat” entry of the “System
Parameters” menu (shown in Section 4.9.1 on page 55).
7.3 A
UTOMATIC
F
AULT
C
LEARANCE
The Care2 Console will automatically clear accepted faults if they
are remedied.
