Care2
Installation Instructions
36
Care2 issue 7
6. The Console will then require a System Reset (see Section
7. Ensure the correct number of
Local
outstations are detected
by the system.
Note: All outstations will be reported as DRS units by default.
8.
For Networked Systems:
Repeat steps (1) to (7) for each Console on the network.
N
OTE
: It is possible to perform a basic functionality check on each
outstation to ensure the audio path is correct .
N
OTE
: It is possible to perform the basic functionality check on NEP
Consoles if a Roaming Handset (C2RTH) is plugged into the front panel.
The NEP will automatically detect the C2RTH Handset and allow the
console to answer incoming LOCAL calls.
On removal, the NEP will announce a fault as the handset is being
monitored.
The Console Handset must be changed to "None" after testing is complete
and the handset is removed. See section 4.6 on page 49 for details on
changing the Console Handset.
Note: Do not connect the site Network Cables to the C2CN at this time.
