Care2
Installation Instructions
Care2 issue 7
37
4.2 M
ASTER
/ S
LAVE
/ NEP I
NDICATOR
4.2.1 "Master" (or Non-networked) Console
Figure 4.1 — Icon Indicating "Master" Console
4.2.2 "Slave" Console
Figure 4.2 — Icon Indicating "Slave" Console
4.2.3 "NEP" Console
Figure 4.3 — Icon Indicating "NEP" Console
N
OTE
: If a C2CN Network is detected the default is "Slave" console,
otherwise the default setting is "Master" console.
Note: After completing the "Internal Device Detection" procedure select
option (3) as shown above on the Master Console.
The Master and Slave Consoles are toggled using this option.
N
OTE
: This option is automatically selected if "CH Type": None is
entered into the Console configuration and a Handset is not detected.
