www.baldormotion.com
Basic Installation 3-3
MN1928
3.1.4 Other requirements for installation
H
The NextMove ES re5 V and ±12 V power supplies. The total power requirement
(excluding any option cards) is +5 V at 1 A, +12 V at 50 mA and -12 V at 50 mA. If digital
outputs are to be used, a supply will be required to drive them - see section 4.4.2.
H
A PC that fulfills the following specification:
Minimum specification
Recommended specification
Processor
Intel Pentium
III
500 MHz
Intel Pentium
III
/ 4 or equivalent
1 GHz or faster
RAM
128 MB
1 GB
Hard disk space
50 MB
50 MB
CD-ROM
A CD-ROM drive
Serial port
USB port
or
RS232 or RS485 serial port (depending on NextMove ES model)
Screen
1024 x 768, 16-bit color
1152 x 864, 16-bit color
Mouse
A mouse or similar pointing device
Operating
system
Windows 95*, NT*
Windows 98*, ME*, NT*,
2000, XP, Vista
* For USB support, Windows 2000, XP or Vista is required. Software installation will be
described later, in section 6.
H
A USB cable, or a serial cable connected as shown in section 4.5.4.
H
Your PC operating system user manual might be useful if you are not familiar with Windows.
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ,
07045-0097 • (973) 335-1007 • Toll Free: (800) 922-1103
Fax: (973) 335-1661 • www.servosystems.com
