42
Inspection and Maintenance:
(continued)
MONTHLY
– Grease the tailing or off-load conveyor wheel bearings. We recommend
JT-
6
grease (
no more than 3 pumps
).
MONTHLY
– Remove guard from the tailing conveyor and check chain tension. Tension
should be “taut” with no more than 1/4” deflection in the chain. Adjust tension via the
two (2) idler sprockets.
Bearings located
on each of the four
(4) corners
Bearings located
on each of the four
(4) corners
Bearings located
on each of the four
(4) corners
Bearings located
on each of the four
(4) corners
Remove conveyor
guard to check
chain tension
Tension should be
“taut” with no more than
1/4” deflection
Two (2) chain
tensioners
Two (2) idler
sprockets
Figure 38
Figure 38A
Figure 38B
Bottoms-up View
