22
Leveling the Head and Frame
(continued)
With the bubble level on the bunks nearest the center of the mill, loosen the two jam nuts on the side
of one of the leveling legs and turn the bolt on the top clockwise to raise or counter-clockwise to
lower the leveling leg (see
Figure
22 below).
Once a level status is achieved (
both vertically and horizontally, per the bubble level
), tighten the (2)
leveling leg locking bolts and then continue to the next set of leveling legs.
After all leveling legs have been adjusted, check all bolts for tightness and tighten the associated
jamb nuts.
Loosen jam nuts and then
loosen leg-locking bolts
Turn bolt to adjust leg height
Loosen jam nuts and then
loosen leg-locking bolts
Figure 22
