Bailey Infi 90 NIDO01, Instruction

Page: 11 / 30

INTRODUCTION
GLOSSARY OF TERMS AND ABBREVIATIONS
I-E96-411A 1 - 3
GLOSSARY OF TERMS AND ABBREVIATIONS
Table 1-2 lists definitions of the terms and abbreviations used
in this instruction.
SPECIFICATIONS
Refer to Table 1-3 for the specifications of the NIDO01 termina-
tion module.
® Network 90 is a registered trademark of Elsag Bailey Process Automation.
Table 1-2. Glossary of Terms and Abbreviations
Term Definition
Bus A channel or path for transferring data, electrical signals and power.
Digital A discretely variable signal usually having only two states, on or off.
MFC Multi-function controller. A multiple loop controller with data acquisition and informa-
tion processing capabilities.
MFP Multi-function processor. A multiple loop controller with data acquisition and informa-
tion processing capabilities.
MMU Module mounting unit. A card cage that provides electrical and communication sup-
port for INFI 90/Network 90
®
modules.
Termination
Module Provides input/output connection between plant equipment and INFI 90/Network 90
modules.
TMU Termination mounting unit. A card cage that provides housing for INFI 90/Network 90
termination modules.
Table 1-3. Specifications
Property Characteristic/Value
Inputs and Outputs
IMDSM05 modules
IMLMM02 modules
Digital outputs (16 at 24 VDC).
Digital inputs (8 at 24 VDC, and 125 VDC)
Digital outputs (8 at 24 VDC)
Surge Protection Meets IEEE-472-1974 Surge Withstand Capability Test.
1
Mounting Occupies one slot in a standard INFI 90 termination mounting unit.
Ambient Temperature 0
°
to 70
°
C (32
°
to 158
°
F).
Relative Humidity 0% to 95% up to 55
°
C(131
°
F)(noncondensing)
0% to 45% up to 70
°
C (158
°
F)(noncondensing)
Air Quality Noncorrosive
Certification CSA certified for use as process control equipment in an ordinary (non-
hazardous) location.
NOTE: 1. Do not use the NKTM01 cable when compliance with IEEE-472-1974 is necessary.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.