Bailey Infi 90 NIDO01, Instruction

Page: 10 / 30

INTRODUCTION
INSTRUCTION CONTENT
1 - 2 I-E96-411A
®
INSTRUCTION CONTENT
This manual contains five sections and two appendices:
Introduction This section contains an overview of the features, specifica-
tions and a description of the IDO termination module.
Installation This section describes precautions to observe when handling
modules and setup procedures required before module opera-
tion. This section also discusses jumper settings and installa-
tion procedures.
Maintenance This section provides a maintenance schedule.
Repair/Replacement
Procedures
This section details how to replace an IDO termination module.
Support Services This section describes the support services (spare parts, train-
ing, documentation, etc.) available from Bailey Controls Com-
pany.
Appendices A and B These appendices list the quick reference information neces-
sary to configure the IMDSM05 and IMLMM02 modules.
HOW TO USE THIS MANUAL
Read this manual through in sequence. Read the installation
section thoroughly. Do the steps in order. Complete all steps in
the installation section before operating the IDO module. Refer
to the table of contents or index to find specific information
after the module is operating.
NOMENCLATURE
Table 1-1 is a list of related hardware.
Table 1-1. Nomenclature
Nomenclature Hardware/Description
NIDO01 Digital output termination module.
NKTU02 Termination module cable (PVC).
NKTU12 Termination module cable (non-PVC).
NKTM01 Termination module cable (ribbon).
NTMU01 Termination mounting unit, rear mounting.
NTMU02 Termination mounting unit, front mounting.
258436A1 Cable retaining kit used when at least oneround
cable is connected to the terminationmounting unit.