INSTALLATION
SETUP/PHYSICAL INSTALLATION
I-E96-411A
2 - 3
example input and output circuits. To completely remove a
jumper, cut at both ends.
Cable Connections
The NIDO01 Digital Output Termination Module terminates
digital I/O signals, and ties them directly to a master or slave
module. Figure
shows the cables to use and the cable con-
nections for two different NIDO01 module applications. Table
lists each cable and its application.
Figure 2-1. NIDO01 Termination Module Layout
T00526A
TERMINAL 1
TERMINAL 32
6-AMP
FUSE
REMOVE
FOR
LMM02
REMOVE
FOR
DSM05
P1 CARD EDGE
CONNECTOR FOR
NKTM01 OR
NKTU02/12 CABLE
P1
NIDO01
Figure 2-2. Example Input and Output Circuits
TYPICAL LMM
INPUT CIRCUIT
TYPICAL DSM/LMM
OUTPUT CIRCUIT
+
+
–
–
+24 VDC
COM
T00527A
