Bailey infi 90 IMHSS03, Instruction

Page: 73 / 93

INTRODUCTION
I-E96-322A A - 1
APPENDIX A - QUICK REFERENCE GUIDE
INTRODUCTION
Appendix A contains a quick reference guide of IMHSS03
dipswitch and jumper settings, and operating LED states.
Tables
A-1 through A-5 list the operating options selected by
setting the IMHSS03 dipswitches. Table A-6 lists operating
options selected by setting jumpers. Table A-7 lists IMHSS03
LED states.
IMHSS03 DIPSWITCH AND JUMPER SETTINGS
Table A-2 lists demodulator gain settings. Table A-3 lists con-
troller gain settings. The gain values in these tables apply to
modules configured with function code 150. For gain values of
modules using function 55, refer to the
Function Code Appli-
cation Manual . To start demodulator tuning using function
code 55, set the demodulator gain (dipswitch S2) to two. To
start controller tuning using function code 55, set the control-
ler gain (dipswitch S3) to one.
Table A-1. Dipswitch S1, I/O Expander
Bus Address Example Settings
Example
Address
Dipswitch Pole
(Binary Value)
1
(128)
2
(64)
3
(32)
4
(16)
5
(8)
6
(4)
7
(2)
8
(1)
15 0 0 0 0 1 1 1 1
32 0 0 1 0 0 0 0 0
63 0 0 1 1 1 1 1 1
NOTE: 0 = CLOSED or ON, 1 = OPEN or OFF.
Table A-2. Dipswitch S2, Demodulator Gain
Gain
Dipswitch Pole
1 2 3 4 5 6 7 8
2.0 1 1 1 1 1 1 1 0
5.5 1 1 1 1 1 1 0 1
10.0 1 1 1 1 1 0 1 1
21.1 1 1 1 1 0 1 1 1
48.8 1 1 1 0 1 1 1 1
72.0 1 1 0 1 1 1 1 1
100.9 1 0 1 1 1 1 1 1
152.0 0 1 1 1 1 1 1 1
NOTE: 0 = CLOSED or ON, 1 = OPEN or OFF.