INSTALLATION
UNPACKING AND INSPECTION
3 - 2
I-E96-322A
®
unnecessary circuit board malfunction, do not use a lead pen-
cil to set a dipswitch.
UNPACKING AND INSPECTION
1. Examine the hardware immediately to verify that it has not
been damaged in transit.
2. Notify the nearest Bailey sales office of any such damage.
3. File a claim for any damage with the transportation com-
pany that handled the shipment.
4. Use the original packing material and container to store the
hardware.
5. Store the hardware in an environment of good air quality,
free from temperature and moisture extremes.
INSTALLING THE PROCESS HARDWARE
To install the throttle valve, hydraulic actuator, servo valve (or
I/H converter) and LVDT transformer:
1. Follow the manufacturer’s directions and recommenda-
tions for installation.
2. Use the size and type of cabling the manufacturer
recommends.
INSTALLING THE TERMINATION UNIT OR MODULE
For information about installing process wiring and the
hydraulic servo termination unit (THS), digital I/O termination
unit (TDI), or digital I/O termination module (IDI), refer to the
appropriate termination device instruction. Appendices C
through E contain quick reference information for each of the
termination devices.
WARNING
Only qualified personnel should install the throttle valve,
hydraulic actuator, servo valve and linear variable differential
transformer. Improper installation can cause damage to plant
equipment, reduce plant performance and compromise the
safety of plant personnel.
AVERTISSEMENT
Seulement un personnel qualifié devrait effectuer l'installation
de la vanne de réglage, de l'actuateur hydraulique, de la
servo-vanne, et du transformateur à différentiel linéaire vari-
able. Une mauvaise installation peut causer des dommages à
l'équipement, peut réduire la performance de l'usine et peut
compromettre la sécurité du personnel.
