IIOIC12 HARDWARE
HARDWARE SETTINGS
5 - 6
I-E96-107-2N
®
Computer Graphics Controller Card
•
Elsag Bailey Part Number - 1948493A83.
The computer graphics controller card, shown in Figure
can drive one OIC monitor and the ATI inboard mouse. The
card uses a graphics processor which provides for very fast
graphics draw and update times.
An internal cable from the mouse port to the keyboard inter-
face panel, allows the mouse to be connected to the front of the
keyboard interface panel.
NOTES:
1.
In OIC12 Software Release 5.1, the mouse is connected to the
mouse connector on the rear of the PC using cable P/N L700912A2
(see
for mouse assembly part numbers).
2.
Recent models of OIC12 use P/N L750058-1 video cards, or
built-in video in the PC.
Network Controller Card
•
Elsag Bailey Part Number - L750067B2.
The network card, shown in Figure
, provides communica-
tion with the master OIS12 Console via Ethernet.
The network cable to connect the OIC12 to the OIS12 is Elsag
Bailey P/N L700691-[L], length per application requirements.
One end of the network cable is fastened to the network card
in the OIC12. The other end is fastened to the OIS12 master.
Note that a “T” connector (Elsag Bailey part number
L750096_1) and termination resistor (Elsag Bailey part num-
ber L750095_1) must be installed. For an overview of a typical
network configuration see Figure
NOTE: Recent models of OIC12 use a similar network card which
has no jumpers to set up.
Figure 5-6. Computer Graphic Controller Card
CONNECT TO CRT
VIDEO CABLE
CONNECT TO
MOUSE CABLE
(5.0 RELEASE ONLY)
GS940103
